|
|
JOURNAL ARTICLES
Refereed Papers in Major Technical Journals
2007
2007 “Control of Space Rigidizable-Inflatable Boom Using Macro-Fiber Composite” |
Tarazaga, Pablo, Inman, Daniel J. and Wilkie, W. Keats |
Journal of Vibration and Control, Vol. 13, No. 7 |
|
2006
2006 “Quadratic Compression Method for Model Updating and Its Noise Filtering Properties” |
Tarazaga, Pablo, Halevi, Yoram, and Inman, Daniel J. |
Journal of Mechanical Systems and Signal Processing (MSSP) Vol. 21, No. 1 |
|
2006 "Gossamer Spacecraft: Recent Trends in Design, Analysis, Experimentation, and Control" |
Ruggiero, Eric J. and Daniel J. Inman |
Journal of Spacecraft and Rockets, Vol. 3, No. 1 |
|
2005
2005 "A Comparison Between SISO and MIMO Modal Analysis Techniques on a Membrane Mirror Satellite" |
Ruggiero, Eric J. and Daniel J. Inman |
Journal of Intelligent Material Systems and Structures (Special Edition), Vol. 16, No. 3 |
|
2005 "Comparison of Piezoelectric Energy Harvesting Devices for Recharging Batteries" |
Sodano, H.A., Inman, D.J., Park, G. |
Journal of Intelligent Material Systems and Structures, Vol. 16, No. 10, pp. 799-807 |
|
2005 "Multiple Sensors and Actuators for Vibration Suppression of an Inflatable Torus" |
Sodano, H.A., Park, G., Inman, D.J. |
AIAA Journal of Spacecraft and Rockets, Vol. 42, No. 2, pp. 370-373 |
|
2005 "Generation and Storage of Electricity from Power Harvesting Devices" |
Sodano, H.A., Inman, D.J., Park, G. |
Journal of Intelligent Material Systems and Structures, Vol. 16, No. 1, pp. 67-75 |
|
2005 "Use of Response Surface Metamodels for Identification of Stiffness and Damping Coefficients in a Simple Dynamic System" |
Rutherford, A.C., Inman, D.J., Park, G., Hemez, F.M. |
Shock and Vibration, Vol. 12, No. 5, pp. 317-332 |
|
2004
2004 "An Investigation into the Performance of Macro-Fiber composites for Sensing and Structural Vibration Applications" |
Sodano, H.A., Park, G., Inman, D.J. |
Mechanical Systems and Signal Processing, Vol. 18, No. 3 pp. 683-697 |
|
2004 "A Review of Power Harvesting from Vibration Using Piezoelectric Materials" |
Sodano, H.A., Inman, D.J., Park, G. |
The Shock and Vibration Digest, Vol. 36, No. 3, pp. 197-205 |
|
2004 "Detecting Damage in Graphite/Epoxy Composites using Impedance-based Structural Health Monitoring" |
Grisso, B. L., Peairs, D. M, and Inman, D. J. |
Applied Mechanics and Materials: Advances in Experimental Mechanics, Vols. 1-2, pp. 185-190 |
|
2004 "Estimation of Electric Charge Output for Piezoelectric Energy Harvesting" |
Sodano, H.A., Inman, D.J., Park, G. |
International Journal for Strain Measurement, Vol. 40, No.2, pp. 49-58 |
|
2004 "Improving Accessibility of the Impedance-based Structural Health Monitoring Method" |
Peairs, D., Park, G., Inman, D.J. |
Journal of Intelligent Material Systems and Structures, Vol. 15, No. 2, pp. 129-140 |
|
2004 "Manufacturing and Cure Kinetics Modeling for Macro Fiber Composite Actuators" |
Williams, R. B., Inman, D. J. and Wilkie, W. K. |
Journal of Reinforced Plastics and Composites, Vol. 23, No. 16, pp.1741-1754 |
|
2004 "Multi-Input Multi-Output Vibration Testing of an Inflatable Torus" |
Ruggiero, E.J., Park, G., Inman, D.J. |
Mechanical Systems and Signal Processing, Vol. 18, No. 5, pp. 1187-1201 |
|
2004 "Nonlinear Mechanical Behavior of Macro Fiber Composite Actuators" |
Williams, R. B., Schultz, M. R., Hyer, M. W., Inman, D. J. and Wilkie, W. K. |
Journal of Composite Materials, Vol. 38, No. 10, pp. 855-870 |
|
2004 "Practical Issues of Activating Self-Repairing Bolted Joints" |
Peairs, D.M., Park, G., Inman, D.J. |
Smart Materials and Structures, Vol. 13, No. 6, pp. 1414-1423 |
|
2004 "Temperature-Dependent Coefficients of Thermal Expansion in Macro Fiber Composite Actuators" |
Williams, R. B., Inman, D. J. and Wilkie, W. K. |
Journal of Thermal Stresses, Vol 27, No. 10, pp. 903-916 |
|
2003
2003 "A Literature Review on the Ultra-Light, Inflated Toroidal Satellite Components" |
Ruggiero, E.J., Jha, A., Park, G., Inman, D.J. |
The Shock and Vibration Digest, Vol. 35, No, 3, pp. 171-181 |
|
2003 "Overview of Piezoelectric Impedance-based Health Monitoring and Path Forward" |
Park, G., Sohn, H., Farrar, C.R., Inman, D.J. |
The Shock and Vibration Digest, Vol. 35, No. 6, pp. 451-463 |
|
2003 "Self-Repairing Joints Employing Shape Memory Alloy Actuators" |
Park, G., Muntges, D.E., Inman D.J. |
JOM-Journal of Minerals, Metals & Materials Society, Vol. 55, No. 12, pp. 33-37 |
|
2003 "Vibration Testing and Finite Element Analysis of an Inflatable Structure" |
Park, G., Sausse, M., Inman, D.J., Main, J.A. |
AIAA Journal, Vol. 41, No 8, pp. 1556-1563 |
|
2002
2002 "Dynamic Testing of an Inflatable Structure using Smart Materials" |
Park, G., Ruggiero, E.J., Inman D.J. |
Smart Materials and Structures, Vol. 11, No. 1, pp. 147-155 |
|
2002 "Local Effects of Piezopolymer Patches on Inflatable Space-Based Structures" |
Williams, R. B., Austin, E. M. and Inman, D. J. |
Journal of Spacecraft and Rockets, Vol. 39, No. 2, pp. 299-305 |
|
2001
2001 "Feasibility to Control Launch Vehicle Internal Acoustics Using Piezoelectric Actuators" |
Niezrecki, C. and Cudney, H. H. |
Journal of Intelligent Material Systems and Structures, Vol. 12(9), pp. 647-660 |
|
2001 "Feasibility of Using Impedance-based Damage Assessment for Pipeline Systems" |
Park, G., Cudney, H., Inman, D.J. |
Earthquake Engineering & Structural Dynamics Journal, Vol. 30, No. 10, pp. 1463-1474 |
|
2001 "Integration of Smart Materials into Dynamics and Control of Inflatable Space Structures" |
Park, G., Kim, M., Inman, D.J. |
Journal of Intelligent Material Systems and Structures, Vol. 12, No. 6, pp. 423-433 |
|
2001 "Limitations of Using Membrane Theory for Modeling PVDF Patches on Inflatable Structures" |
Williams, R. B., Austin, E. M. and Inman, D. J. |
Journal of Intelligent Material Systems and Structures, Vol. 12, No. 1, pp. 11-20 |
|
2000
2000 "An Integrated Health Monitoring Technique Using Structural Impedance Sensors" |
Park, G., Cudney, H., Inman, D.J. |
Journal of Intelligent Material Systems and Structures, Vol. 11, No. 6, pp. 448-455 |
|
2000 "A Structural Health Monitoring Technique using Artificial Neural Network and Structural Impedance Sensors" |
Lopes, V., Park, G., Cudney, H., Inman, D.J. |
Journal of Intelligent Material Systems and Structures, Vol. 11, No. 3, pp. 206-214 |
|
2000 "Impedance-based Health Monitoring of Civil Structural Components" |
Park, G., Cudney, H., Inman, D.J. |
ASCE Journal of Infrastructure Systems, Vol. 6, No. 4, pp. 153-160 |
|
2000 "Internal Acoustic Response of a Simply-Supported Cylinder with Single Mode Structural Vibration" |
Niezrecki, C. and Cudney, H. H. |
Journal of Sound and Vibration, Vol. 229(1), pp. 183-193 |
|
1999
1999 "Creating and Verifying a Research-Grade Simply Supported Cylinder with PZT Actuation" |
Niezrecki, C. and Cudney, H. H. |
Journal of Sound and Vibration, Vol. 228(5), pp. 961-975 |
|
1999 "Impedance-Based Structural Health Monitoring for Temperature Varying Applications" |
Gyuhae Park, Kazuhisa Kabeya, Harley H. Cudney, and Daniel J. Inman |
JSME, Vol. 42, No. 2, pp. 249-258 |
|
1997
1997 “Structural Control Using Analog Phase-Locked Loops” |
Niezrecki, C. and Cudney, H. H. |
Journal of Vibration and Acoustics, Vol. 119, pp. 104-109 |
|
1996
1996 "Impedance-Based Modeling of Induced Strain Actuators Bonded on Ring Structures" |
F. Lalande, Z. Chaudhry, and Craig Rogers |
Journal of Sound and Vibration, Vol. 201, No. 2, pp. 169-187 |
|
1996 "Dynamic Power and Energy Capabilities of Commercially-Available Electro-Active Induced-Strain Actuators" |
Victor Giurgiutiu and Craig Rogers |
Journal of Intelligent Material Systems and Structures, Vol. 7, No. 6, pp. 656-667 |
|
1996 "Passive and Active Tagging of Glass-Fiber Polymeric Composites for In-Process and In-Field Non-Destructive Evaluation" |
V. Giurgiutiu, Z. Chen, F. Lalande, C. A. Rogers, R. Quattrone, and J. Berman |
Journal of Intelligent Material Systems and Structures, Vol. 7, No. 6, pp. 623-634 |
|
1996 "Energy-Based Comparison of Solid-State Induced-Strain Actuators" |
V. Giurgiutiu and C. A. Rogers |
Journal of Intelligent Material Systems and Structures, Vol. 7, No. 1, pp. 4-14 |
|
1996 "Solid-State Actuation of Rotor Blade Servo-Flap for Active Vibration Control" |
V. Giurgiutiu, C. A. Rogers, and R. Rusovici |
Journal of Intelligent Material Systems and Structures, Vol. 7, No. 2, pp. 192-202 |
|
1996 "Dynamic Transduction Characterization of Magnetostrictive Actuators" |
A. Ackerman, C. Liang, and C. A. Rogers |
Smart Materials and Structures, Vol. 5, pp. 115-120 |
|
1996 "Electro-mechanical Impedance Modeling of Active Material Systems" |
C. Liang, F. P. Sun, and C. A. Rogers |
Smart Materials and Structures, Vol. 5, pp. 171-186 |
|
1996 "An Impedance-Based System Modeling Approach for Induced Strain Actuator-Driven Structures" |
S. Zhou, C. Liang, and C. A. Rogers |
Journal of Vibration and Acoustics, Vol. 118. |
|
1996 "Power Flow and Consumption in Piezoelectrically-Actuated Structures" |
S. Zhou and C. A. Rogers |
AIAA Journal, Vol. 33, No. 7, pp. 1305-1311, (included on AIAA Journal's first CD-ROM) |
|
1995
1995 "Engineering Feasibility of Induced Strain Actuators for Rotor Blade Active Vibration Control" |
V. Giurgiutiu, Z. Chaudhry, and C. A. Rogers |
Journal of Intelligent Material Systems and Structures, Vol. 6, No. 5, pp. 583-597 |
|
1995 "Modeling of Induced Strain of Shell Structures" |
Z. Chaudhry, F. Lalande, and C. A. Rogers |
Journal of the Acoustical Society of America, Vol. 97, No. 5, pp. 2872-2877 |
|
1995 "Modeling Considerations for In-Phase Actuation of Actuators Bonded to Shell Structures" |
F. Lalande, Z. Chaudhry, and C. A. Rogers |
AIAA Journal, Vol. 33, No. 7, pp. 1300-1303 |
|
1995 "Debond Detection using Broad-Band High-Frequency Excitation and Non-Contacting Laser Vibrometer System" |
F. Lalande, Z. Chaudhry, F. P. Sun, and C. A. Rogers |
Journal of Intelligent Material Systems and Structures, Vol. 7, No. 2, pp. 176-181 |
|
1995 "Determination of Design of Optimal Actuator Location and Configuration Based on Actuator Power Factor" |
C. Liang, F. P. Sun, and C. A. Rogers |
Journal of Intelligent Material Systems and Structures, Vol. 6, No. 4, pp. 456-464 |
|
1995 "Electromechanical Analysis of Piezoelectric Stack Active Member Power Consumption" |
E. Flint, C. Liang, and C. A. Rogers |
Journal of Intelligent Material Systems and Structures, Vol. 6, No. 1, pp. 117-124 |
|
1995 "Heat Generation, Temperature, and Thermal Stress of Structurally Integrated Piezo-Actuators" |
S. Zhou and C. A. Rogers |
Journal of Intelligent Material Systems and Structures, Vol. 6, No. 3, pp. 372-379 |
|
1995 "Comparison of Different Impedance-Based Models for Out-of-Phase Actuation of Actuators Bonded on Ring Structures" |
F. Lalande, Z. Chaudhry, and C. A. Rogers |
Journal of Intelligent Material Systems and Structures, Vol. 6, No. 3, pp. 389-395 |
|
1995 "Integration and Design of Piezoceramic Elements in Intelligent Structures" |
S. Zhou, C. Liang, and C. A. Rogers |
Journal of Intelligent Material Systems and Structures, Vol. 6, No. 6, pp. 733-742 |
|
1995 "Impedance-Based Modeling of Actuators Bonded to Shell Structures" |
F. Lalande, Z. Chaudhry, and C. A. Rogers |
Journal of Intelligent Material Systems and Structures, Vol. 6, No. 6, pp. 765-775 |
|
1995 "Experimental Verification of Optimal Actuator Location and Configuration Based on Actuator Power Factor" |
A. Bhargava, Z. Chaudhry, C. Liang, and C. A. Rogers |
Journal of Intelligent Material Systems and Structures, Vol. 6, No. 3, pp. 411-418 |
|
1995 "Adaptive Composite Materials with Shape Memory Alloy Actuators for Cylinders and Pressure Vessels" |
J. S. N. Paine, C. A. Rogers, and R. A. Smith |
Journal of Intelligent Material Systems and Structures, Vol. 6, No. 2, pp. 210-219 |
|
1995 "Truss Structure Integrity Identification Using PZT Sensor-Actuator" |
F. P. Sun, Z. Chaudhry, C. Liang, and C. A. Rogers |
Journal of Intelligent Material Systems and Structures, Vol. 6, No. 1, pp. 134-139 |
|
1995 "Integration and Design of Piezoelectric Patch Actuators" |
S. Zhou, C. Liang, and C. A. Rogers |
Journal of Intelligent Material Systems and Structures, Vol. 6, No. 1, pp. 125-133 |
|
1995 "A Simplified Geometrically Nonlinear Approach to the Analysis of the Moonie Actuator" |
F. Lalande, Z. Chaudhry, and C. A. Rogers |
IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, Vol. 42, No. 1, pp. 21-27 |
|
1994
1994 “Improving Power Consumption Characteristics of Piezoelectric Actuators” |
Niezrecki, C. and Cudney, H. H. |
Journal of Intelligent Material Systems and Structures, Vol. 5, No. 4, pp. 522-529 |
|
1994 "The Response of SMA Hybrid Composite Materials to Low Velocity Impact" |
J. S. N. Paine and C. A. Rogers |
Journal of Intelligent Material Systems and Structures, Vol. 5, No. 4, pp. 530-535 |
|
1994 "Intelligent Material Systems - the Dawn of a New Materials Age" |
C. A. Rogers |
Science of Machine Journal, Vol. 46, No. 9, pp. 977-983 |
|
1994 "Power Consumption of Piezoelectric Actuators Driving a Simply Supported Beam Considering Fluid Coupling" |
S. C. Stein, C. Liang, and C. A. Rogers |
Journal of the Acoustical Society of America, Vol. 96, No. 3, pp. 1598-1604 |
|
1994 "Modeling of Distributed Piezoelectric Actuators Integrated with Thin Cylindrical Shells" |
S. Zhou, C. Liang, and C. A. Rogers |
Journal of the Acoustical Society of America, Vol. 96, No. 3, pp. 1605-1612 |
|
1994 "Dynamic Analysis of Piezoelectric Actuator-Driven Circular Rings Using an Impedance Approach" |
A. Rossi, C. Liang, and C. A. Rogers |
Journal of the Acoustical Society of America, Vol. 96, No. 3, pp. 1592-1597 |
|
1994 "Performance and Optimization of Induced Strain Actuated Structures Under the Action of External Loading" |
Z. Chaudhry and C. A. Rogers |
AIAA Journal, Vol. 32, No. 6, pp. 1289-1294 |
|
1994 "The Pin-Force Model Revisited" |
Z. Chaudhry and C. A. Rogers |
Journal for Intelligent Materials Systems and Structures, Vol. 5, No. 3, pp. 347-354 |
|
1994 "Characterization of Interfacial Shear Strength Between SMA Actuators and Host Composite Material in Adaptive Composite Material Systems" |
J. Paine and C. A. Rogers |
ASME Adaptive Structures and Material Systems, AD-Vol. 35, pp. 63-70 |
|
1994 "Optimal Placement of Piezoelectric Actuators in Adaptive Truss Structures" |
R. Lammering, J. Jia, and C. A. Rogers |
Journal of Sound and Vibration, Vol. 171, No. 1, pp. 67-85 |
|
1993
1993 "An Impedance Method for Dynamic Analysis of Adaptive Material Systems" |
C. Liang, F. P. Sun, and C. A. Rogers |
ASME Journal of Vibration and Acoustics, Vol. 116, No. 1, pp. 120-128 |
|
1993 "Enhanced Structural Control with Discretely Attached Induced Strain Actuators" |
Z. Chaudhry and C. A. Rogers |
Journal of Mechanical Design, Vol. 115, No. 4, December 1993, pp. 718-722 |
|
1993 "Adaptive Response Control of Cantilevered Thin-Walled Beams Carrying Heavy Concentrated Masses" |
O. L. Song, L. Librescu, and C. A. Rogers |
Journal of Intelligent Material Systems and Structures, Vol. 5, No. 1, pp. 42-48 |
|
1993 "A Macroscopic Phenomenological Formulation for Coupled Electromechanical Effects in Piezoelectricity" |
X. D. Zhang and C. A. Rogers |
Journal of Intelligent Material Systems and Structures, Vol. 4, No. 3, pp. 307-316 |
|
1993 "Coupled Electro-Mechanical Analysis of Adaptive Material Systems - Determination of the Actuator Power Consumption and System Energy Transfer" |
C. Liang, F. P. Sun, and C. A. Rogers |
Journal of Intelligent Material Systems and Structures, Vol. 5, No. 1, pp. 12-20 |
|
1993 "Enhancing Induced Strain Actuator Authority Through Discrete Attachment to Structural Elements" |
Z. Chaudhry and C. A. Rogers |
AIAA Journal, Vol. 31, No. 7, July 1993, pp. 1287-1292 |
|
1993 "Adaptive Vibrational Behavior of Cantilevered Structures Modeled as Composite Thin-Walled Beams" |
L. Librescu, O. Song, and C. A. Rogers |
International Journal of Engineering Science, Vol. 31, No. 5, pp. 775-792 |
|
1993 "Design of Shape Memory Alloy Springs with Applications in Vibration Control" |
C. Liang and C. A. Rogers |
Journal of Vibration and Acoustics, Vol. 115, No. 1, pp. 129-135 |
|
1993 "Application of Adaptive Technology to Static Aeroelastic Control of Wing Structures" |
O. L. Song, L. Librescu, and C. A. Rogers |
AIAA Journal, Vol. 30, No. 12, pp. 2882-2889 |
|
1993 "Intelligent Material Systems - The Dawn of a New Materials Age" |
C. A. Rogers |
Journal of Intelligent Material Systems and Structures, Vol. 4, No. 1, pp. 4-12 |
|
1992
1992 "Formulation of a Mechanical Model for Composites with Embedded SMA Actuators" |
J. Jia and C. A. Rogers |
Journal of Mechanical Design, Vol. 114, December, pp. 670-676 |
|
1992 "Technology Assessment and Development of Large Deployable Antennas" |
C. A. Rogers, W. L. Stutzman, T. G. Campbell, and J. M. Hedgepeth |
Journal of Aerospace Engineering, Vol. 6, No. 1, pp. 34-54 |
|
1992. "Control of Sound Radiation with Active/Adaptive Structures" |
C. R. Fuller, C. A. Rogers, and H. H. Robertshaw |
Journal of Sound and Vibration, Vol. 157, No. 1, pp. 19-39 |
|
1992 "Modeling of the Two-Way Shape Memory Effect" |
X. D. Zhang, C. A. Rogers, and C. Liang, |
Philosophical Magazine, Vol. 65, No. 5, pp. 1199-1215 |
|
1992 "A Multi-Dimensional Constitutive Model for Shape Memory Alloys" |
C. Liang and C. A. Rogers |
Journal of Engineering Mathematics, Vol. 26, pp. 429-443 |
|
1992 "Response of Composite Beams to an Internal Actuator Force" |
Z. Chaudhry and C. A. Rogers |
AIAA Proceedings pp. 186-193 |
|
1992 "Vibration and Low Frequency Acoustic Analysis of Piecewise-Activated Adaptive Composite Panels" |
W. S. Anders, C. A. Rogers, and C. R. Fuller |
Journal of Composite Materials, Vol. 26, No. 1, pp. 103-120 |
|
1991
1991 "Design of Shape Memory Alloy Actuators" |
C. Liang and C. A. Rogers |
Journal of Mechanical Design, Vol. 114, No. 2, pp. 223-230 |
|
1991 "Structural Acoustic Control of a Shape Memory Alloy Composite Beam" |
W. R. Saunders, H. H. Robertshaw, and C. A. Rogers |
Journal of Intelligent Material Systems and Structures, Vol. 2, No. 4, pp. 508-527 |
|
1991 "Bending and Shape Control of Beams Using SMA Actuators" |
Z. Chaudhry and Craig A. Rogers |
Journal of Intelligent Material Systems and Structures, Vol. 2, No. 4, pp. 581-602 |
|
1991 "Modeling of Finite-Length Spatially-Distributed Induced Strain Actuators for Laminate Beams and Plates" |
Bor-Tsuen Wang and C. A. Rogers |
Journal of Intelligent Material Systems and Structures, Vol. 2, No. 1, pp. 38-58 |
|
1991 "The Effect of Thermoplastic Composite Processing on the Performance of Embedded Nitinol Actuators" |
J. S. N. Paine and C. A. Rogers |
Journal of Thermoplastic Composite Materials, Vol. 4, April, pp. 102-122 |
|
1991 "Laminate Plate Theory for Spatially Distributed Induced Strain Actuators" |
Bor-Tsuen Wang and Craig A. Rogers |
Journal of Composite Materials, Vol. 25, No. 4, pp. 433-452 |
|
1991 "Acoustic Transmission and Radiation Analysis of Adaptive Shape-Memory Alloy Reinforced Laminated Plates" |
C. Liang, C. A. Rogers, and C. R. Fuller |
Journal of Sound and Vibration, Vol. 145, No. 1, pp. 23-41 |
|
1991 "Structural Modification of Simply-Supported Laminated Plates Using Embedded Shape Memory Alloy Fibers" |
C. A. Rogers, C. Liang and J. Jia |
Journal of Computers and Structures, Vol. 38, No. 5/6, pp. 569-580 |
|
1991 "Piezoelectric Actuators for Distributed Vibration Excitation of Thin Plates" |
E. K. Dimitriadis, C. R. Fuller, and C. A. Rogers |
Journal of Vibration and Acoustics, Vol. 113, January, pp. 100-107 |
|
1991 "Modeling of Shape Memory Alloy Hybrid Composites for Structural Acoustic Control" |
C. A. Rogers, C. Liang, and C. R. Fuller |
Journal of the Acoustical Society of America, Vol. 89, No. 1, pp. 210-220 |
|
1990
1990 "Formulation of a Laminated Shell Theory Incorporating Embedded Distributed Actuators" |
J. Jia and C. A. Rogers |
Journal of Mechanical Design, Vol. 112, December, pp. 596-604 |
|
1990 "Active Vibration and Structural Acoustic Control of Shape Memory Alloy Hybrid Composites: Experimental Results" |
C. A. Rogers |
Journal of the Acoustical Society of America, Vol. 88, No. 6, pp. 2803-2811 |
|
1990 "Design of Spur Gears Generated with Pinion Cutters" |
C. A. Rogers, H. H. Mabie and C. F. Reinholtz |
International Journal of Mechanism and Machine Theory, Vol. 25, No. 6, pp. 623-634 |
|
1990 "Design of Nonstandard Spur Gears Cut by a Hob" |
H. H. Mabie, C. A. Rogers and C. F. Reinholtz |
International Journal of Mechanism and Machine Theory, Vol. 25, No. 6, pp. 635-644 |
|
1989
1989 "A Computer Programming Project for Kinematics and Dynamics of Machinery" |
R. E. Cobb, C. A. Rogers, and C. F. Reinholtz |
|
1988
1988 "An Axisymmetric Linear/High-Order Finite Element for Filament Wound Composites-I. Formulation and Algorithm" |
C. A. Rogers and C. E. Knight, Jr. |
Journal of Computers and Structures, Vol. 29, No. 2, pp. 265-271 |
|
|
310 Durham Hall, MC 0261
Blacksburg, VA 24061
Phone: 540-231-2908 | Fax: 540-231-2903 | cimss vt.edu |
|
